Most Minneapolis homes built during the 1900s-1940s with pockets of newer infill era have completely empty wall cavities behind their wood clapboard siding. These uninsulated walls are the single largest source of heat loss, allowing cold air to flow freely through the exterior envelope every time the wind blows. For Minneapolis homeowners, that translates to high heating bills, cold drafts near exterior walls, and rooms that never seem to reach a comfortable temperature.
RetroGreen Energy solves this with RetroFoam injection insulation — a tripolymer foam that we inject directly into the wall cavities through small holes drilled in the exterior. The foam expands to fill every gap, crack, and void, creating a complete thermal and air barrier without removing any siding or disturbing interior finishes. We work with wood clapboard, stucco, aluminum over original wood — all siding types found on Minneapolis homes. Most wall insulation projects in Minneapolis are completed in a single day.
Minneapolis homeowners served by Xcel Energy can qualify for rebates of Up to $1,200 per measure on wall insulation projects. We handle the rebate paperwork and offer 0% financing up to 60 months. Call (612) 276-5293 to schedule your free diagnostic assessment and see exactly where your walls are losing heat.
Key Benefits
Lower Energy Bills
RetroFoam's air seal stops conditioned air from escaping. Most homeowners see a 15-50% reduction in heating and cooling costs.
Consistent Room Temperatures
No more hot and cold spots. Every room maintains a comfortable temperature because the envelope is properly sealed.
Reduced Outdoor Noise
The dense foam acts as a sound barrier, significantly reducing traffic noise and other outdoor disturbances.
No Moisture or Mold Risk
RetroFoam doesn't absorb water and doesn't promote mold growth, unlike fiberglass which can trap moisture inside wall cavities.
Common Minneapolis Home Types We Insulate
Craftsman bungalow
1900s-1940s with pockets of newer infillCommon in Uptown, Northeast
Craftsman bungalows in Minneapolis typically have 2x4 wall framing with empty cavities behind wood clapboard siding. RetroFoam injection fills these cavities completely in one day.
Foursquare
1900s-1940s with pockets of newer infillCommon in Uptown, Northeast
Foursquare homes in Minneapolis often have balloon-frame construction with continuous wall cavities from basement to attic. RetroFoam fills these tall cavities at each floor level.
Victorian
1900s-1940s with pockets of newer infillCommon in Uptown, Northeast
Victorian homes in Minneapolis often have balloon-frame construction with continuous wall cavities from basement to attic. RetroFoam fills these tall cavities at each floor level.
Our Process in Minneapolis
Siding Removal and Preparation
We carefully remove a course of siding to expose the wall sheathing beneath. Each stud cavity is located and a small hole is drilled. Our technicians use a specialized tool to check for obstructions inside the wall before injection begins.
RetroFoam Injection
RetroFoam the resin is mixed in the truck, then injected into each wall cavity through the drilled holes. The foam flows to fill every gap, crack, and void — wrapping around wiring, plumbing, and any obstacles. Pressure gauges ensure complete fill without over-packing.
Seal, Replace, and Verify
All drill holes are plugged and sealed. Siding is carefully replaced to its original position. We perform a final inspection to verify complete coverage and ensure your home looks exactly as it did before.